FENCE ART MATERIAL

Fence Art is printed on ABS (Acrylonitrile Butadiene Styrene), which is the type of plastic that plumbing pipes and Lego blocks are made from. It is a flexible material. The smallest three sizes ship flat, while the largest three sizes ship rolled. This keeps shipping costs within an affordable range.

Fence Art is printed with inks that are cured by UV light.  The inks are lightfast, limiting fading when exposed to sunlight in the outdoors. Fence Art comes in multiple sizes including:

AVAILABLE SIZES

Small (22.5″ x 15″)

Square (22.5″ x 22.5″)

Medium (22″ x 33″)

Large (30″ x 45″)

X-Large (40″ x 60″)

Oversize (46.5″ x 70″)

TESTING & MAINTENANCE

Fence Art can withstand climate conditions from -20 degrees Celsius to 80 degrees Celsius. These products have been tested for over five years of outdoor exposure with little to no maintenance required. We don’t recommend using a pressure washer on them, but a garden hose is strongly recommended for removing any dirt, pollen, soot from air pollution, bird droppings, etc. from the prints at the end of every fall season.

INSTALLATION & CARE

Please review our installation template for care instructions. Materials may warp when installed in close proximity to barbecues. Please ensure the placement of artwork is not within 6’ of your barbecue or any outdoor heat source.

Fence Art has micro-radius corners. There are no sharp corners to limit scratches or scrapes during material handling. Our rolled prints are secured with a yellow tape that contains a printed warning to unroll with care, as the product may spring open and cause injury or damage.  We also fold the end of the tape over to create a tab that allows for easy unpacking. Please do not use a knife or scissors to unpack your Fence Art.

CUSTOM OPTIONS

We have a fabulous collection of artwork that is available for viewing in our gallery. You can also upload your own photo’s to personalize your backyard, cottage, or patio experience.